This change is resolving an issue that was caused by the combination of:
- Android system libraries being relro packed in N+.
- Breakpad dealing with relro packed libraries in a hack way.
This is a fix for http://crbug/611824.
I also found an use-after-free issue (bug in Minidump::SeekToStreamType). I disallowed the MinidumpStreamInfo copy and assign constructors and the compiler detected another similar issue in Minidump::Print. Then I disabled the copy and assign constructors for most classes in minidump.h (just in case). There are a couple of classes where I couldn't disallow them (since assign is used). This will require a small refactor so I left it out of this CL.
R=mark@chromium.org
Review URL: https://codereview.chromium.org/2060663002 .
__builtin_trap() causes a SIGTRAP on arm64 (at least with GCC 4.9).
SIGTRAP is not handled by breakpad, causing crashes induced by
__builtin_trap() to be missed.
Note that on x86 and arm, instead, __builtin_trap() raises a SIGILL,
which is already handled by breakapd.
BUG=chromium:614865
R=vapier@chromium.org
Review URL: https://codereview.chromium.org/2042853002 .
src/client/linux/minidump_writer/minidump_writer.cc:273 obtains the
stack info by calling GetStackInfo(). That method will return the
stack base address, aligned to the bottom of the memory page that
'stack_pointer' is in. After that it will cap the size of the memory
area to be copied into the minidump to 'max_stack_len', starting from
the base address, if the caller requested so. This will be the case
when collecting reduced stacks, as introduced by this change:
https://breakpad.appspot.com/487002/
In such cases the caller will request 2048 bytes of memory. However
GetStackInfo() will have aligned the base address to the page
boundary, by default 4096 bytes. If the stack, which grows towards the
base address from the top ends before the 2048 bytes of the first
block, then we will not collect any useful part of the stack.
As a fix we skip chunks of 'max_stack_len' bytes starting from
the base address until the stack_pointer is actually contained in the
chunk, which we will add to the minidump file.
BUG=https://bugs.chromium.org/p/google-breakpad/issues/detail?id=695R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1959643004 .
Patch from Lars Volker <lv@cloudera.com>.
When a crash occurs as a result of an allocation failure, it is useful
to know approximately what regions of the virtual address space remain
available, so that we know whether the crash should be attributed to
memory fragmentation, or some other cause.
BUG=525938
R=primiano@chromium.org
Review URL: https://codereview.chromium.org/1796803003 .
Reason for revert:
It is causing breakpad crash reports to be invalid (see the associated
bug).
Merging empty holes in r-x mappings was originally introduced in
https://breakpad.appspot.com/7714003 to deal with the first generation
of relro packing, which could introduce holes within a .so mapping:
[libchrome.so]
[guard region]
[libchrome.so]
However, the logic is broken for the case of two *different* adjacent
.so mappings with a guard region in the middle:
[libfoo.so]
[guard region]
[libchrome.so]
In this case the guard region is mistakenly associated with libfoo.so,
but that is not the right thing to do. In fact, the second generation of
rerlo packing added the guard region to prevent mmaps from overlapping
and to give room for the non-zero vaddr of relro-packed libraries, which
require an anticipated load bias.
As the first generation of relro packing is not used anymore, there is
no reason to keep this buggy code, which causes failures in decoding
crashes where an arbitrary library is mapped immediately before a rerlo
packed library.
Original issue's description:
> Extend mapping merge to include reserved but unused mappings.
>
> When parsing /proc/pid/maps, current code merges adjacent entries that
> refer to the same library and where the start of the second is equal to
> the end of the first, for example:
>
> 40022000-40025000 r-xp 00000000 b3:11 827 /system/lib/liblog.so
> 40025000-40026000 r--p 00002000 b3:11 827 /system/lib/liblog.so
> 40026000-40027000 rw-p 00003000 b3:11 827 /system/lib/liblog.so
>
> When the system linker loads a library it first reserves all the address
> space required, from the smallest start to the largest end address, using
> an anonymous mapping, and then maps loaded segments inside that reservation.
> If the loaded segments do not fully occupy the reservation this leaves
> gaps, and these gaps prevent merges that should occur from occurring:
>
> 40417000-4044a000 r-xp 00000000 b3:11 820 /system/lib/libjpeg.so
> > 4044a000-4044b000 ---p 00000000 00:00 0
> 4044b000-4044c000 r--p 00033000 b3:11 820 /system/lib/libjpeg.so
> 4044c000-4044d000 rw-p 00034000 b3:11 820 /system/lib/libjpeg.so
>
> Where the segments that follow this gap do not contain executable code
> the failure to merge does not affect breakpad operation. However, where
> they do then the merge needs to occur. Packing relocations in a large
> library splits the executable segment into two, resulting in:
>
> 73b0c000-73b21000 r-xp 00000000 b3:19 786460
> /data/.../libchrome.2160.0.so
> > 73b21000-73d12000 ---p 00000000 00:00 0
> 73d12000-75a90000 r-xp 00014000 b3:19 786460
> /data/.../libchrome.2160.0.so
> 75a90000-75c0d000 rw-p 01d91000 b3:19 786460
> /data/.../libchrome.2160.0.so
>
> Here the mapping at 73d12000-75a90000 must be merged into 73b0c000-73b21000
> so that breakpad correctly calculates the base address for text.
>
> This change enables the full merge by also merging anonymous maps which
> result from unused reservation, identified as '---p' with offset 0, and
> which follow on from an executable mapping, into that executable mapping.
>
> BUG=chromium:394703
BUG=chromium:499747
R=primiano@chromium.org, rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1923383002 .
This preserves full build ids in minidumps, which are useful for
tracking down the right version of system libraries from Linux
distributions.
The default build id produced by GNU binutils' ld is a 160-bit SHA-1
hash of some parts of the binary, which is exactly 20 bytes:
https://sourceware.org/binutils/docs-2.26/ld/Options.html#index-g_t_002d_002dbuild_002did-292
The bulk of the changes here are to change the signatures of the
FileID methods to use a wasteful_vector instead of raw pointers, since
build ids can be of arbitrary length.
The previous change that added support for this in the processor code
preserved the return value of `Minidump::debug_identifier()` as the
current `GUID+age` treatment for backwards-compatibility, and exposed
the full build id from `Minidump::code_identifier()`, which was
previously stubbed out for Linux dumps. This change keeps the debug ID
in the `dump_syms` output the same to match.
R=mark@chromium.org, thestig@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1688743002 .
The Linux dumpers use absolute paths for shared libraries referenced by
dumps, so they fail to locate them if the crash originated in a chroot.
This CL enables callers to specify a root prefix, which is prepended to
mapping paths before opening them.
BUG=chromium:591792
TEST=make check
Review URL: https://codereview.chromium.org/1761023002/
Although strictly the GPU fingerprint is defined by the build fingerprint,
there is not currently a straightforward mapping from build fingerprint
to useful GPU / GL driver information.
In order to aid debugging of WebView crashes that occur in GL drivers,
and to better understand the range of drivers and versions for feature
blacklisting purposes, it is useful to have GPU fingerprints in breakpad
microdumps.
Landing this patch on behalf of Tobias Sargeant<tobiasjs@chromium.org>
BUG=chromium:536769
R=primiano@chromium.org, thestig@chromium.org
Review URL: https://codereview.chromium.org/1334473003 .
On Android the size of the alternate stack can be very small (8k).
Even if breakpad uses sigaltstack to increase the size of the alternate
stack during initialization, that call affects only the main thread.
On Android, the libc's pthread initializer reset the sigaltstack to 8k.
When entering a signal handler, the kernel typically pushes the context
on the alternate stack. On arm64, sizeof(CrashContext) is ~5k, which
leaves 3k of usable stack for breakpad.
On top of that, breakpad allocates another struct CrashContext on the
stack. In the case of Android arm64, then, breakpad ends up using
5k + 5k > 8k of stack, which causes a stack overflow.
This got unnoticed in Android L, as the alternate stack didn't have
red-zones between them, so breakpad was often happily overflowing onto
the next thread's stack. This is not the case anymore [1].
This CL moves the CrashContext into a global variable. It should be
safe as the ExceptionHandlers are serialized on a mutex.
[1] 595752f623
BUG=374
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1354923002 .
The PopSeccompStackFrame was introduced to deal with stack frames
originated in the legacy seccomp sandbox. The only user of that
sandbox was Google Chrome, but the legacy sandbox has been
deprecated in 2013 (crrev.com/1290643003) in favor of the new
bpf sandbox.
Removing this dead code as it has some small bound checking bug
which causes occasional crashes in WebView (which are totally
unrelated to the sandbox).
Note: this will require a corresponding change in the chromium
GYP/GN build files to roll.
BUG=665,chromium:477444
R=jln@chromium.org, mark@chromium.org, torne@chromium.org
Review URL: https://codereview.chromium.org/1299593003 .
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1492 4c0a9323-5329-0410-9bdc-e9ce6186880e
So far the microdump_writer dumped the log in logcat using the default
system log. This is simple to achieve but has some drawbacks:
1. Creates spam in the system log, pushing back other eventual useful
messages.
2. There is a high chance that the microdump gets lost if some log
spam storm happens immediately after a crash and before the log
is collected by the feedback client.
3. Since Android L, the logger is smartly throttling messages (to
reduce logcat spam). Throttling brekpad logs defeats the all
point of microdumps.
This change is conceptually very simple. Replace the use of
__android_log_write() with __android_log_buf_write(), which takes
an extra bufID argument. The main drawback is that the
__android_log_buf_write is not exported in the NDK and needs to be
dynamically looked up via dlsym.
This choice has been discussed and advocated by Android owners.
See the internal bug b/21753476.
BUG=chromium:512755
R=thestig@chromium.org
Review URL: https://codereview.chromium.org/1286063003 .
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1490 4c0a9323-5329-0410-9bdc-e9ce6186880e
The thread info expects the struct names as they expect in asm/ptrace.h,
but the header doesn't include that, it includes sys/user.h. Rename the
reg structs to match that header.
Rename the elf_siginfo to _elf_siginfo to avoid conflicting with the one
in the sys/procfs.h. It is only used locally in one place, so we don't
need to update any callers.
Otherwise, drop in aarch64 support into the minidump-2-core file.
BUG=chromium:334368
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1474 4c0a9323-5329-0410-9bdc-e9ce6186880e
When LLVM sees an attempt to dereference a NULL pointer, it will generate
invalid opcodes (undefined behavior) which leads to SIGILL which breaks
this unittest. Upstream's recommendation in this case is to add volatile
markings to get the actual dereference to happen.
This is documented in the blog post under "Dereferencing a NULL Pointer":
http://blog.llvm.org/2011/05/what-every-c-programmer-should-know.html
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1473 4c0a9323-5329-0410-9bdc-e9ce6186880e
When changing a module's start_addr to account for Android packed
relocations, also adjust its size field so that the apparent module
end addr calculated by the breakpad processor does not alter.
Ensures that the mapping entry from a packed library is consistent
with that which an unpacked one would produce.
BUG=499747
R=primiano@chromium.org, rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1211863002.
Patch from Simon Baldwin <simonb@chromium.org>.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1465 4c0a9323-5329-0410-9bdc-e9ce6186880e
Shared libraries containing Android packed relocations have a load
bias that differs from the start address in /proc/$$/maps. Current
breakpad assumes that the load bias and mapping start address are
the same.
Fixed by changing the client to detect the presence of Android packed
relocations in the address space of a loaded library, and adjusting the
stored mapping start address of any that are packed so that it contains
the linker's load bias.
For this to work properly, it is important that the non-packed library
is symbolized for breakpad. Either packed or non-packed libraries may
be run on the device; the client detects which has been loaded by the
linker.
BUG=499747
R=primiano@chromium.org, rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1189823002.
Patch from Simon Baldwin <simonb@chromium.org>.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1459 4c0a9323-5329-0410-9bdc-e9ce6186880e
This is to add build fingerprint and product name/version to
microdumps. Conversely to what happens in the case of minidumps
with MIME fields, due to the nature of minidumps, extra metadata
cannot be reliably injected after the dump is completed.
This CL adds the plumbing to inject two optional fields plus the
corresponding tests.
BUG=chromium:410294
R=thestig@chromium.org
Review URL: https://codereview.chromium.org/1125153008
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1456 4c0a9323-5329-0410-9bdc-e9ce6186880e
The current code is relying on info->si_pid to figure out whether
the exception handler was triggered by a signal coming from the kernel
(that will re-trigger until the cause that triggered the signal has
been cleared) or from user-space e.g., kill -SIGNAL pid, which will NOT
automatically re-trigger in the next signal handler in the chain.
While the intentions are good (manually re-triggering user-space
signals), the current implementation mistakenly looks at the si_pid
field in siginfo_t, assuming that it is coming from the kernel if
si_pid == 0.
This is wrong. siginfo_t, in fact, is a union and si_pid is meaningful
only for userspace signals. For signals originated by the kernel,
instead, si_pid overlaps with si_addr (the faulting address).
As a matter of facts, the current implementation is mistakenly
re-triggering the signal using tgkill for most of the kernel-space
signals (unless the fault address is exactly 0x0).
This is not completelly correct for the case of SIGSEGV/SIGBUS. The
next handler in the chain will stil see the signal, but the |siginfo|
and the |context| arguments of the handler will be meaningless
(retriggering a signal with tgkill doesn't preserve them).
Therefore, if the next handler in the chain expects those arguments
to be set, it will fail.
Concretelly, this is causing problems to WebView. In some rare
circumstances, the next handler in the chain is a user-space runtime
which does SIGSEGV handling to implement speculative null pointer
managed exceptions (see as an example
http://www.mono-project.com/docs/advanced/runtime/docs/exception-handling/)
The fix herein proposed consists in using the si_code (see SI_FROMUSER
macros) to determine whether a signal is coming form the kernel
(and therefore just re-establish the next signal handler) or from
userspace (and use the tgkill logic).
Repro case:
This issue is visible in Chrome for Android with this simple repro case:
- Add a non-null pointer dereference in the codebase:
*((volatile int*)0xbeef) = 42
Without this change: the next handler (the libc trap) prints:
F/libc ( 595): Fatal signal 11 (SIGSEGV), code 1, fault addr 0x487
where 0x487 is actually the PID of the process (which is wrong).
With this change: the next handler prints:
F/libc ( 595): Fatal signal 11 (SIGSEGV), code 1, fault addr 0xbeef
which is the correct answer.
BUG=chromium:481937
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/6844002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1454 4c0a9323-5329-0410-9bdc-e9ce6186880e
Despite the fact that many places imply that sigaction and rt_sigaction
are essentially the same, rt_sigaction's signature is actually
different-- it takes the size of the kernel's sigset_t as an extra argument.
BUG=473973
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1447 4c0a9323-5329-0410-9bdc-e9ce6186880e
On Android L+, signal and sigaction symbols are provided by libsigchain
that override the system's versions. There is a bug in these functions
where they essentially ignore requests to install SIG_DFL.
Workaround this issue by explicitly performing a syscall to
__NR_rt_sigaction to install SIG_DFL on Android.
BUG=473973
Patch by Chris Hopman <cjhopman@chromium.org>
Review URL: https://breakpad.appspot.com/1804002/
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1438 4c0a9323-5329-0410-9bdc-e9ce6186880e
This is a reland of the previous CL (r1433). r1433 did not achieve what
intended and failed the x86_64 build of Chrome with NDK r10c.
The workaround logic in this CL is identical to r1433, but the #define
magic is applied in a more appropriate proper place this time. Turns
out Breakpad already has an Android compatibility layer, which is
common/android/include. Piggybacking the fix there.
BUG=breakpad:642
R=fdegans@chromium.org, rmcilroy@chromium.org
Review URL: https://breakpad.appspot.com/3794002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1434 4c0a9323-5329-0410-9bdc-e9ce6186880e
r1397 did introduce a workaround to deal with a typo in sys/user.h
in the Android NDK. The typo has been fixed in [1]. However, breakpad
cannot just switch to the fixed version as this would require atomic
rolls of Breakpad and NDK in chromium, which would make reverts hard
to handle.
This change introduces an inelegant yet functional hack which makes
breakpad compatible with both versions of the NDK, with and without
the typo. It can be reverted once Chrome has stably rolled to NDK
r10d.
[1] https://android.googlesource.com/platform/bionic/+/f485547b
BUG=breakpad:642
R=fdegans@chromium.org, rmcilroy@chromium.org
Review URL: https://breakpad.appspot.com/7814002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1433 4c0a9323-5329-0410-9bdc-e9ce6186880e
A recent change in the client-side microdump write (r1404) ended up
introducing a call to new() to instantiate the line buffer that
microdump uses to dump its lines. new/malloc is a luxury we cannot
afford in a compromised context.
This change switches the line buffer to be backed by the dumper
page allocator, which on Linux/Android ends up requesting pages
via mmap.
Also, the microdump write bails out without crashing if the page
allocator failed (crash during severe OOM).
BUG=640
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1432 4c0a9323-5329-0410-9bdc-e9ce6186880e
A computation in the stack unwind algorithm could cause an overflow if a base
pointer read from crashed process is sufficiently close to top of address space.
This causes a memory read that causes the dump thread to crash, resulting in a
failure to generate crash dump. Check fixed to properly detect that this pointer
is greater than actual memory range of current stack.
Patch by Kyle Joswiak <kjoswiak@chromium.org>
Review URL: https://breakpad.appspot.com/3754003/
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1425 4c0a9323-5329-0410-9bdc-e9ce6186880e
When LinuxCoreDumper fails to copy process data from a core file, it
fills the return buffer with a repeated sequence of a special marker.
However, MinidumpWriter doesn't know about that and may incorrectly
interpret the data. In many cases, MinidumpWriter simply copies the
gibberish data to the minidump, which isn't too bad. However, the
gibberish data may cause MinidumpWriter to behave badly in some other
cases. For example, when MinidumpWriter tries to iterate through the
linked list of all loaded DSOs via the r_map field of a r_debug struct,
if the linked list is filed with the special marker, the code keeps
iterating through the same address.
This CL addresses the issue by having LinuxCoreDumper::CopyFromProcess()
returns a Boolean value to indicate if the expected data is found from
the core file. MinidumpWriter can then decide how to handle that.
BUG=chromium:453484
TEST=Run core2md with the test data attached to chromium:453484.
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/4724002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1420 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Filter modules by prot flags (only +x) not extensions. It wouldn't
otherwise catch the case of Chrome mapping the library from the
apk (which is mapped r-x but doesn't end in .so).
- Use compile-time detection of target arch, in order to cope with
multilib OSes, where uname() doesn't reflect the run-time arch.
- Add OS information and CPU arch / count.
- Add support for aarch64.
- Add tests and stackwalk expectations for aarch64.
- Fix a potential overflow bug in the processor.
- Rebaseline the tests using smaller symbols.
- Fix microdump_writer_unittest.cc on 32-bit host.
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1407 4c0a9323-5329-0410-9bdc-e9ce6186880e
Microdumps are a very lightweight variant of minidumps. They are meant
to dump a minimal crash report on the system log (logcat on Android),
containing only the state of the crashing thread.
This is to deal with cases where the user has opted out from crash
uploading but we still want to generate meaningful information on the
device to pull a stacktrace for development purposes.
Conversely to conventional stack traces (e.g. the one generated by
Android's debuggerd or Chromium's base::stacktrace) microdumps do NOT
require unwind tables to be present in the target binary. This allows
to save precious binary size (~1.5 MB for Chrome on Arm, ~10 MB on
arm64).
More information and design doc on crbug.com/410294
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1398 4c0a9323-5329-0410-9bdc-e9ce6186880e
This change introduces the necessary glue typedefs to deal with the
mismatch introduced by the latest Android NDK (w.r.t. desktop Linux):
- [x86_64] Rename fpregs mxcr_mask -> .mxcsr_mask
- [mips] uc_mcontext.fpregs.fp_r.fp_dregs -> uc_mcontext.fpreg
- [mips] restore the forked user.h
Submitting this on behalf of fdegans@chromium.orgTBR=mark@chromium.org
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1397 4c0a9323-5329-0410-9bdc-e9ce6186880e
This is a refactoring of the logic which determines the
module name and path for a given MappingInfo in minidump_writer.cc.
Such logic, which will be soon shared also with the upcoming
microdump_writer.cc, is simply being moved to linux_dumper.cc,
extracting a GetMappingEffectiveNameAndPath method.
No behavioral change is intended.
BUG=chromium:410294
R=thestig@chromium.org
Review URL: https://breakpad.appspot.com/7734002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1392 4c0a9323-5329-0410-9bdc-e9ce6186880e
This change is a pure refactoring of the common bits of minidump_writer.cc
that will be shared soon with the upcoming microdump_writer.cc.
In particular, this CL is extracting the following classes:
- ThreadInfo: handles the state of the threads in the crashing process.
- RawContextCPU: typedef for arch-specific CPU context structure.
- UContextReader: Fills out a dump RawContextCPU structure from the
ucontext struct provided by the kernel (arch-dependent).
- SeccompUnwinder: cleans out the stack frames of the Seccomp sandbox
on the supported architectures.
- MappingInfo: handles information about mappings
BUG=chromium:410294
R=mmandlis@chromium.org
Review URL: https://breakpad.appspot.com/4684002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1388 4c0a9323-5329-0410-9bdc-e9ce6186880e
When parsing /proc/pid/maps, current code merges adjacent entries that
refer to the same library and where the start of the second is equal to
the end of the first, for example:
40022000-40025000 r-xp 00000000 b3:11 827 /system/lib/liblog.so
40025000-40026000 r--p 00002000 b3:11 827 /system/lib/liblog.so
40026000-40027000 rw-p 00003000 b3:11 827 /system/lib/liblog.so
When the system linker loads a library it first reserves all the address
space required, from the smallest start to the largest end address, using
an anonymous mapping, and then maps loaded segments inside that reservation.
If the loaded segments do not fully occupy the reservation this leaves
gaps, and these gaps prevent merges that should occur from occurring:
40417000-4044a000 r-xp 00000000 b3:11 820 /system/lib/libjpeg.so
> 4044a000-4044b000 ---p 00000000 00:00 0
4044b000-4044c000 r--p 00033000 b3:11 820 /system/lib/libjpeg.so
4044c000-4044d000 rw-p 00034000 b3:11 820 /system/lib/libjpeg.so
Where the segments that follow this gap do not contain executable code
the failure to merge does not affect breakpad operation. However, where
they do then the merge needs to occur. Packing relocations in a large
library splits the executable segment into two, resulting in:
73b0c000-73b21000 r-xp 00000000 b3:19 786460 /data/.../libchrome.2160.0.so
> 73b21000-73d12000 ---p 00000000 00:00 0
73d12000-75a90000 r-xp 00014000 b3:19 786460 /data/.../libchrome.2160.0.so
75a90000-75c0d000 rw-p 01d91000 b3:19 786460 /data/.../libchrome.2160.0.so
Here the mapping at 73d12000-75a90000 must be merged into 73b0c000-73b21000
so that breakpad correctly calculates the base address for text.
This change enables the full merge by also merging anonymous maps which
result from unused reservation, identified as '---p' with offset 0, and
which follow on from an executable mapping, into that executable mapping.
BUG=chromium:394703
R=rmcilroy@chromium.org, thestig@chromium.org
Review URL: https://breakpad.appspot.com/7714003
Patch from Simon Baldwin <simonb@chromium.org>.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1380 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch makes two changes to breakpad to enable crash reporting to work correctly when the library is inside another file (an archive):
- Do not filter mappings which map an executable at a non-zero offset.
- If such an executable is mapped look in the ELF information for the
shared object name and use that name in the minidump.
Note this change doesn't care about the archive format and isn't Android
specific (though loading the shared library this way is currently only done on Android).
BUG=390618
R=thestig@chromium.org
Review URL: https://breakpad.appspot.com/7684002
Patch from Anton Carver <anton@chromium.org>.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1355 4c0a9323-5329-0410-9bdc-e9ce6186880e
__system_property_get has been removed from the Android NDK for 'L' so Breakpad
no longer links. This CL just removes the call in WriteOSInformation because
Chrome already passes the build fingerprint as a crash key called "android_build_fp" in the crash report HTTP POST message.
BUG=394841,393903
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/1694002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1351 4c0a9323-5329-0410-9bdc-e9ce6186880e
This bug manifests itself on Android x64 (in ExceptionHandlerTest::ExternalDumper), but is possible on any platform.
The compiler is unaware of the code which runs in the signal handler which reads this variable. Without volatile the compiler is free to optimise away writes to this variable which it believes are never read.
BUG=381142, 346626
R=thestig@chromium.org
Review URL: https://breakpad.appspot.com/8664002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1343 4c0a9323-5329-0410-9bdc-e9ce6186880e
This is an initial attempt to add Arm64 (aarch64) support to Breakpad for
Linux / Android platforms. This CL adds the Arm64 data structures, but does
not yet implement the Android getcontext support or CPUFillFromThreadInfo /
CPUFillFromUContext.
BUG=354405,335641
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/1354002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1301 4c0a9323-5329-0410-9bdc-e9ce6186880e
The current CreateChildCrash logic is racy when it comes to creating a
crash dump for two reasons:
The main thread that calls kill() on a different thread is guaranteed
the signal will be *queued* when it returns, but not *delivered*. If
the kernel doesn't automatically schedule the receiving thread, but
instead lets the main thread run to the exit() call, then the signal
never triggers a coredump and the whole process simply exits.
The main thread is using kill() to try to deliver a signal to a
specific thread, but that function is for sending signals to a
process. That means the kernel is free to deliver the signal to
any thread in the process and not just the one requested. This
manifests itself as the pr_pid in the coredump not being the one
expected. Instead, we must use tkill() with the tid (which we
already took care of gathering) to deliver to a specific thread.
These are a lot easier to see on a UMP system as contention is heavier.
BUG=chromium:207918
TEST=`dumper_unittest` still passes, and doesn't flake out in a UMP system
TEST=`linux_client_unittest` still passes
R=benchan@chromium.org
Review URL: https://breakpad.appspot.com/1304005
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1299 4c0a9323-5329-0410-9bdc-e9ce6186880e
There are a bunch of tests that use invalid memory acesses (on purpose)
to trigger a crash so that we can detect things are dumped correctly.
When we run under ASAN, it catches those accesses and the breaks the
testing flow.
For now, use the existing ADDRESS_SANITIZER symbol to disable more tests.
Ideally we'd use a compile-time attribute to disable ASAN on a few funcs,
but that seems to be broken atm.
BUG=chromium:293519
BUG=chromium:304575
TEST=ran unittests under ASAN and they now pass
TEST=ran unittests w/out asan/clang and they still pass
R=benchan@chromium.org
Review URL: https://breakpad.appspot.com/884002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1255 4c0a9323-5329-0410-9bdc-e9ce6186880e
For CPUs that don't support the MMX instruction set, such pre-Pentium III or industrial x86 embedded PCs, the minidump fails when it tries to retrieve MMX specific registers.
This patch adds MMX detection for that call.
Tested on Ubuntu 12.04 with i686, and on a custom Linux distro on a Vortex86DX microcontroller.
Original review: https://breakpad.appspot.com/455002/
A=aras.vaichas
BUG=495
Review URL: https://breakpad.appspot.com/864002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1248 4c0a9323-5329-0410-9bdc-e9ce6186880e
It is incorrect to wrap close in HANDLE_EINTR on Linux.
Unnecessary #includes of eintr_wrapper.h are also removed. The variable naming
within the macro is also updated per Chromium r178174.
einter_wrapper.h contains a non-mechanical change. Mechanical changes were
generated by running:
sed -E -i '' \
-e 's/((=|if|return|CHECK|EXPECT|ASSERT).*)HANDLE(_EINTR\(.*close)/\1IGNORE\3/' \
-e 's/(ignore_result|void ?)\(HANDLE_EINTR\((.*close\(.*)\)\)/\2/' \
-e 's/(\(void\) ?)?HANDLE_EINTR\((.*close\(.*)\)/\2/' \
$(grep -rl HANDLE_EINTR.*close . --exclude-dir=.svn)
sed -E -i '' -e '/#include.*eintr_wrapper\.h"/d' \
$(grep -EL '(HANDLE|IGNORE)_EINTR' \
$(grep -Elr '#include.*eintr_wrapper\.h"' . --exclude-dir=.svn))
BUG=chromium:269623
R=ted.mielczarek@gmail.com
Review URL: https://breakpad.appspot.com/784002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1239 4c0a9323-5329-0410-9bdc-e9ce6186880e
SIGABRT can be generated internally, usually by calling abort(),
or externally by another process. When the signal is generated
by the kernel, info->si_pid is 0 and the signal is treated in the
same way as an exception (SIGSEGV, etc.), but the assumption
that the exception happens again upon return from the handler
is wrong, so we must have a special case for this.
Original CL: https://breakpad.appspot.com/734002/
BUG=chromium:303075
TEST=tested with Alt-VolumeUp-X on Chrome OS
A=semenzato@chromium.orgR=semenzato@google.com
Review URL: https://breakpad.appspot.com/754002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1233 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch improves several things for Linux/ARM:
- Better detection of the number of CPUs on the target
device. The content of /proc/cpuinfo only matches the
number of "online" CPUs, which varies over time with
recent Android devices.
- Reconstruct the CPUID and ELF hwcaps values from
/proc/cpuinfo, this is useful to better identify
target devices in minidumps.
- Make minidump_dump display the new information
in useful ways.
- Write a small helper class to parse /proc/cpuinfo
and also use it for x86/64.
- Write a small helper class to parse sysfds cpu lists.
- Add a my_memchr() implementation.
- Add unit tests.
Tested on a Nexus S (1 CPU), Galaxy Nexus (2 CPUs)
and a Nexus 4 (4 CPUs).
Review URL: https://breakpad.appspot.com/540003
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1160 4c0a9323-5329-0410-9bdc-e9ce6186880e
