Renaming variable mips to mips32 since mips is already defined
by the toolchain.
BUG=Compile error in Chromium
R=mark@chromium.org
Review URL: https://codereview.chromium.org/2006393004 .
Patch from Veljko Mihailovic <veljko.mihailovic@imgtec.com>.
In Android, the mmap could be overlapped by /dev/ashmem, we adjusted
the range in https://breakpad.appspot.com/9744002/, but adjusted
range isn't written back to module, this caused the corresponding
module be dropped in BasicCodeModules copy constructor.
This also fix a lot of 'unable to store module' warnings
when dumping Android's minidump.
BUG=606972
R=mark@chromium.org, wfh@chromium.org
Review URL: https://codereview.chromium.org/1939333002 .
Patch from Tao Bai <michaelbai@chromium.org>.
The x86-64 frame pointer-based unwind method will accept values
that aren't valid for the frame pointer register and the return address.
This fixes it to reject non-8-byte-aligned frame pointers, as
well as non-canonical addresses for the return address it finds.
A colleague of mine asked me why Breakpad gave a bad stack
for a crash in our crash-stats system:
https://crash-stats.mozilla.com/report/index/a472c842-2c7b-4ca7-a267-478cf2160405
Digging in, it turns out that the function in frame 0 is a leaf function,
so MSVC doesn't generate an entry in the unwind table for it, so
dump_syms doesn't produce a STACK CFI entry for it in the symbol file.
The stackwalker tries frame pointer unwinding, and %rbp is set to a
value that sort-of works, so it produces a garbage frame 1 and then
is lost. Either of the two checks in this patch would have stopped
the stackwalker from using the frame pointer.
It's possible we could do something smarter on the dump_syms side,
like enumerating all functions and outputing some default STACK CFI rule
for those that don't have unwind info, but that wouldn't fix crashes
from existing builds without re-dumping symbols for them. In any event,
these checks should always pass for valid frame pointer-using functions.
R=mark@chromium.org
BUG=https://bugzilla.mozilla.org/show_bug.cgi?id=1263001
Review URL: https://codereview.chromium.org/1902783002 .
I ran minidump_dump on a dump from Firefox on my Windows 10 machine
and noticed some streams that Breakpad didn't have names for.
Looking in minidumpapiset.h in the Windows 10 SDK finds these values
in MINIDUMP_STREAM_TYPE. There are also struct definitions for the
stream data for some of them (all but JavaScriptData), but I don't have
a particular need for those currently.
R=mark@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1884943002 .
Some projects will get build break because the comipler is confused when
searches for the standard stdio.h. Rename the wrapper file to avoid that.
renamed: src/common/stdio.h -> src/common/stdio_wrapper.h
modified: src/processor/minidump.cc
modified: src/processor/dump_context.cc
modified: src/processor/logging.cc
modified: src/processor/minidump.cc
modified: src/processor/minidump_processor.cc
modified: src/processor/stackwalk_common.cc
modified: src/processor/symbolic_constants_win.cc
R=mark@chromium.org, labath@google.com
Review URL: https://codereview.chromium.org/1864603002 .
Patch from Yunxiao Ma <yxma@google.com>.
This preserves full build ids in minidumps, which are useful for
tracking down the right version of system libraries from Linux
distributions.
The default build id produced by GNU binutils' ld is a 160-bit SHA-1
hash of some parts of the binary, which is exactly 20 bytes:
https://sourceware.org/binutils/docs-2.26/ld/Options.html#index-g_t_002d_002dbuild_002did-292
The bulk of the changes here are to change the signatures of the
FileID methods to use a wasteful_vector instead of raw pointers, since
build ids can be of arbitrary length.
The previous change that added support for this in the processor code
preserved the return value of `Minidump::debug_identifier()` as the
current `GUID+age` treatment for backwards-compatibility, and exposed
the full build id from `Minidump::code_identifier()`, which was
previously stubbed out for Linux dumps. This change keeps the debug ID
in the `dump_syms` output the same to match.
R=mark@chromium.org, thestig@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1688743002 .
Based on changes for ARM, ARM64 and X86, the support for
MIPS and MIPS64 is added in microdump.
TEST=microdump_stackwalk ~/microdump-mips32.dmp symbols/
BUG=microdump_stackwalk failing for mips architectures
Review URL: https://codereview.chromium.org/1731923002/
The code as it stands allocates a chunk of memory of arbitrary size and places an object into it. It stores a pointer to that object and memory into a list telling the compiler that it is a pointer to a char. When the compiler deletes the objects in the list it thinks that the list contains pointers to chars - not pointers to arbitrarily sized regions of memory.
This is fixing an issue that will reproduces when the following optimization (C++ sized dealocation) is enabled: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2013/n3536.html
The fix is to explicitly call the non-sized delete operator, and the library code that supports malloc/free/new/delete will figure out the size of the block of memory from the pointer being passed in.
Patch provided by Darryl Gove.
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1788473002 .
Properly handle microdump processing, when the system_log file contains an incomplete microdump section at the top. The processor will process the first complete microdump section.
R=primiano@chromium.org
Review URL: https://codereview.chromium.org/1742843002 .
G GL_VERSION|GL_VENDOR|GL_RENDERER.
The GPU version, vendor and renderer are extracted during microdump parsing and populated in the appropriate fields in the SystemInfo struct.
This is to match the changes introduced in crrev.com/1343713002 and crrev.com/1334473003
BUG=chromium:536769
R=primiano@chromium.org
Review URL: https://codereview.chromium.org/1678463002 .
This patch changes MDCVInfoELF (which is currently unused, apparently
a vestigal bit of code landed as part of Solaris support) into a supported
CodeView format that simply contains a build id as raw bytes.
Modern ELF toolchains support build ids nicely:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Developer_Guide/compiling-build-id.html
It would be useful to have the original build ids of loaded modules in
Linux minidumps, since tools like Fedora's darkserver allow querying by build
id and the current Breakpad code truncates the build id to the size of a GUID,
which loses information:
https://darkserver.fedoraproject.org/
A follow-up patch will change the Linux minidump generation code to produce
MDCVInfoELF in minidumps instead of MDCVInfoPDB70. This patch should be landed
first to ensure that crash processors are able to handle this format before
dumps are generated containing it.
The full build id is exposed as the return value of Minidump::code_identifier(),
which currently just returns "id" for modules in Linux dumps. For
backwards-compatibility, Minidump::debug_identifier() continues to treat
the build id as a GUID, so debug identifiers for existing modules will not
change.
BUG=
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1675413002 .
This updates the GYP build for the processor component (on windows).
- adds/removes references to files which were added or removed from the
repository
- includes build/common.gypi in the gyp files: needed to correctly
detect the OS (I think, the generated MSVC solutions were broken
without it)
- conditionally compiles code platform-specific code for the given
platform
After this minidump processor nearly compiles with VS2013: the generated
project is correct, but some files still have compilation errors.
Disclaimer: I have not tested the GYP changes on non-windows platform,
as there does not seem to be anyone using it there.
BUG=
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1643633004 .
The std::getline function always returns its first arg (which is an
iostream object) and cannot return anything else. Thus, testing its
value is pointless, and even leads to build errors w/at least gcc-5
due to gtest ASSERT_TRUE funcs only taking bool types:
.../exploitability_unittest.cc: In member function 'virtual void {anonymous}::ExploitabilityLinuxUtilsTest_DisassembleBytesTest_Test::TestBody()':
.../exploitability_unittest.cc:200:136: error: no matching function for call to 'testing::AssertionResult::AssertionResult(std::basic_istream<char>&)'
In file included from .../breakpad_googletest_includes.h:33:0,
from .../exploitability_unittest.cc:35:
.../gtest.h:262:12: note: candidate: testing::AssertionResult::AssertionResult(bool)
Since we know this never fails, simply drop the ASSERT_TRUE usage.
The next line already checks the content of the buffer we read.
Further on in the file, we hit some signed warnings:
In file included from .../breakpad_googletest_includes.h:33:0,
from .../exploitability_unittest.cc:35:
.../gtest.h: In instantiation of 'testing::AssertionResult testing::internal::CmpHelperEQ(const char*, const char*, const T1&, const T2&) [with T1 = long unsigned int; T2 = int]':
.../gtest.h:1484:23: required from 'static testing::AssertionResult testing::internal::EqHelper<lhs_is_null_literal>::Compare(const char*, const char*, const T1&, const T2&) [with T1 = long unsigned int; T2 = int; bool lhs_is_null_literal = false]'
.../exploitability_unittest.cc:241:289: required from here
.../gtest.h:1448:16: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (expected == actual) {
This is because we compare the register value (a uint64_t) directly to
an integer constant, and those are signed by default. Stick a U suffix
on them to fix things up.
BUG=chromium:579384
TEST=`make check` passes
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1611763002 .
Older versions of MSVC don't have a snprintf functions. Some files
were already working around that, but not all of them. Instead of
copying the logic into every file, I centralize it into a new
stdio.h wrapper file and make other files include that.
BUG=
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1602563003 .
Patch from Pavel Labath <labath@google.com>.
This file is not present on windows, and it's causing build errors
there. As far as I can tell, nothing in this file actually uses
that include, so I just remove it.
BUG=
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1475353002 .
Patch from Pavel Labath <labath@google.com>.
There is an issue in StackwalkerAMD64::GetCallerByFramePointerRecovery.
Occasionally it produces invalid frames (instruction pointer == 0) which
prevents the AMD64 stack walker from proceeding to do stack scanning and
instead leads to premature termination of the stack walking process.
For more details: http://crbug/537444
BUG=
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1408973002 .
The Windows client gyp files were missing proc_maps_linux.cc for the
unittest build. Adding that revealed some build errors due to it
unconditionally including <inttypes.h>. Removing the workarounds in
breakpad_types.h (and a few other places) made that build, which means
that Visual C++ 2013 is now our minimum supported version of MSVC.
Additionally I tried building with VC++ 2015 and fixed a few warnings
(which were failing the build because we have /WX enabled) to ensure
that that builds as well.
BUG=https://code.google.com/p/google-breakpad/issues/detail?id=669R=mark@chromium.org
Review URL: https://codereview.chromium.org/1353893002 .
Chrome started hitting some crashes in v8 jitted code which happens to be
non ABI compliant and debuggers (including WinDBG) are unable to produce
meaningful stack traces.
The Breakpad stack walker has some builtin heuristics to deal with such cases.
More specifically, when unable to find a good parent frame, it scans the raw
stack to find a suitable parent frame. The max scan size was set at 30
pointers which was (apparently) not enough to recover in this case.
I'm increasing it to 40 pointers. I confirmed that at 34 pointers it was able
to recover however I'm setting it to 40 in order to it some slack.
I needed to update two unittests which were expecting the previous scan limit.
BUG=
R=mark@chromium.org
Review URL: https://codereview.chromium.org/1379433005 .
the microdump. The microdump OS/arch line looks like:
O A arm 04 armv7l 3.4.0-perf-g4d6e88e #1 SMP PREEMPT Mon Mar 30 19:09:30 2015
and currently the field that says "armv7l" or "aarch64" is being used
to fill in the CPU arch field in crash. The problem is that on a
64-bit device this field *always* says "aarch64" even when running in
a 32-bit process, and so currently the crash reports for aarch64 are
a mix of 32-bit and 64-bit crashes. We should be using the first field
instead, which just says "arm" or "arm64" and reflects the actual
version of webview (32-bit or 64-bit) which is running.
BUG=
R=primiano@chromium.org
Review URL: https://codereview.chromium.org/1306983003 .
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1498 4c0a9323-5329-0410-9bdc-e9ce6186880e
If a crash occurred as a result to a write to unwritable memory, it is reason
to suggest exploitability. The processor checks for a bad write by
disassembling the command that caused the crash by piping the raw bytes near
the instruction pointer through objdump. This allows the processor to see if
the instruction that caused the crash is a write to memory and where the
target of the address is located.
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1273823004
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1497 4c0a9323-5329-0410-9bdc-e9ce6186880e
If a MinidumpLinuxMapsList was created and destroyed without its Read method,
the program would have a segmentation fault because the destructor did not
check for a null maps_ field. Additional changes include additional
supplementary null checks, a potential memory leak fix, and some comment
removal.
Review URL: https://codereview.chromium.org/1271543002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1478 4c0a9323-5329-0410-9bdc-e9ce6186880e
when checking exploitability rating.
Linux minidumps do not support MD_MEMORY_INFO_LIST_STREAM, meaning the
processor cannot retrieve its memory mappings. However, it has its own
stream, MD_LINUX_MAPS, which contains memory mappings specific to Linux
(it contains the contents of /proc/self/maps). This CL allows the minidump
to gather information from the memory mappings for Linux minidumps.
In addition, exploitability rating for Linux dumps now use memory mappings
instead of checking the ELF headers of binaries. The basis for the change
is that checking the ELF headers requires the minidumps to store the memory
from the ELF headers, while the memory mapping data is already present,
meaning the size of a minidump will be unchanged.
As a result, of removing ELF header analysis, two unit tests have been removed.
Arguably, the cases that those unit tests check do not merit a high
exploitability rating and do not warrant a solid conclusion that was given
earlier.
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1251593007
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1476 4c0a9323-5329-0410-9bdc-e9ce6186880e
If the minidump module containing the instruction pointer has memory
containing the ELF header and program header table, when checking the
exploitability rating, the processor will use the ELF header data to determine
if the instruction pointer lies in an executable region of the module, rather
than just checking if it lies in a module.
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1233973002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1472 4c0a9323-5329-0410-9bdc-e9ce6186880e
When I first added the exception whitelist, I meant to put the check before
checking the location of the instruction pointer. (I didn't notice that it
was after the other check until now.) The whitelist check is to quickly rule
out minidumps, and if checking the instruction pointer provided any useful
information, it would be pretty indicative that the exception causing the
dump is interesting.
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1211253009
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1469 4c0a9323-5329-0410-9bdc-e9ce6186880e
in valid code for Linux exploitability rating.
This CL adds to the Linux exploitability checker by verifying that the
instruction pointer is in valid code. Verification is done by obtaining a
memory mapping of the crash and checking if the instruction pointer lies in
an executable region. If there is no memory mapping, the instruction pointer
is checked to determine if it lies within a known module.
R=ivanpe@chromium.org
Review URL: https://codereview.chromium.org/1210493003
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1464 4c0a9323-5329-0410-9bdc-e9ce6186880e
The current code is relying on info->si_pid to figure out whether
the exception handler was triggered by a signal coming from the kernel
(that will re-trigger until the cause that triggered the signal has
been cleared) or from user-space e.g., kill -SIGNAL pid, which will NOT
automatically re-trigger in the next signal handler in the chain.
While the intentions are good (manually re-triggering user-space
signals), the current implementation mistakenly looks at the si_pid
field in siginfo_t, assuming that it is coming from the kernel if
si_pid == 0.
This is wrong. siginfo_t, in fact, is a union and si_pid is meaningful
only for userspace signals. For signals originated by the kernel,
instead, si_pid overlaps with si_addr (the faulting address).
As a matter of facts, the current implementation is mistakenly
re-triggering the signal using tgkill for most of the kernel-space
signals (unless the fault address is exactly 0x0).
This is not completelly correct for the case of SIGSEGV/SIGBUS. The
next handler in the chain will stil see the signal, but the |siginfo|
and the |context| arguments of the handler will be meaningless
(retriggering a signal with tgkill doesn't preserve them).
Therefore, if the next handler in the chain expects those arguments
to be set, it will fail.
Concretelly, this is causing problems to WebView. In some rare
circumstances, the next handler in the chain is a user-space runtime
which does SIGSEGV handling to implement speculative null pointer
managed exceptions (see as an example
http://www.mono-project.com/docs/advanced/runtime/docs/exception-handling/)
The fix herein proposed consists in using the si_code (see SI_FROMUSER
macros) to determine whether a signal is coming form the kernel
(and therefore just re-establish the next signal handler) or from
userspace (and use the tgkill logic).
Repro case:
This issue is visible in Chrome for Android with this simple repro case:
- Add a non-null pointer dereference in the codebase:
*((volatile int*)0xbeef) = 42
Without this change: the next handler (the libc trap) prints:
F/libc ( 595): Fatal signal 11 (SIGSEGV), code 1, fault addr 0x487
where 0x487 is actually the PID of the process (which is wrong).
With this change: the next handler prints:
F/libc ( 595): Fatal signal 11 (SIGSEGV), code 1, fault addr 0xbeef
which is the correct answer.
BUG=chromium:481937
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/6844002.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1461 4c0a9323-5329-0410-9bdc-e9ce6186880e
The current processor implementation is grepping for /google-breakpad(
in the logcat lines, to filter out microdump lines, which by default
look like this:
W/google-breakpad( 3728): -----BEGIN BREAKPAD MICRODUMP-----
Turns out that logcat format can vary, when passing optional arguments,
and produce something like the following:
04-13 12:30:35.563 6531 6531 W google-breakpad: -----BEGIN ...
In the latter case, the "/google-breakpad(" filter is too aggressive.
This change is relaxing it, so it is compatible also with non-default
logcat arguments.
BUG=640
R=mmandlis@chromium.org
Review URL: https://breakpad.appspot.com/2864002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1442 4c0a9323-5329-0410-9bdc-e9ce6186880e
ACCESS_VIOLATION and IN_PAGE_ERROR both specify
read/write/dep flags and address. ACCESS_VIOLATION currently
reports these, but IN_PAGE_ERROR does not. This change makes
IN_PAGE_ERROR report this information as well, and also the
additional NTSTATUS value for the underlying cause.
Patch by bungeman@chromium.org
Review URL: https://breakpad.appspot.com/1794002/
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1441 4c0a9323-5329-0410-9bdc-e9ce6186880e
This feature is enabled only when "-s" is provided as a commandline option.
minidump_stackwalk.cc:
- Add a new commandline option "-s" to output stack contents.
- Instantiate Minidump object in PrintMinidumpProcess() to keep it alive longer so that accessing process_state.thread_memory_regions() in stackwalk_common.cc doesn't result in use-after-free.
stackwalk_common.cc:
- Add a new function PrintStackContents() to output stack contents.
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/9774002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1429 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Filter modules by prot flags (only +x) not extensions. It wouldn't
otherwise catch the case of Chrome mapping the library from the
apk (which is mapped r-x but doesn't end in .so).
- Use compile-time detection of target arch, in order to cope with
multilib OSes, where uname() doesn't reflect the run-time arch.
- Add OS information and CPU arch / count.
- Add support for aarch64.
- Add tests and stackwalk expectations for aarch64.
- Fix a potential overflow bug in the processor.
- Rebaseline the tests using smaller symbols.
- Fix microdump_writer_unittest.cc on 32-bit host.
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1407 4c0a9323-5329-0410-9bdc-e9ce6186880e
and updating minidump_stackwalk to show process uptime.
I tested this with a minidump from Chrome and I got a result that
is inline with what the Windows debugger is showing for that dump:
minidump_stackwalk output:
--------------------------
Process uptime: 601 seconds
WinDBG output:
--------------
Process Uptime: 0 days 0:10:01.000
I didn't update the machine readable output of minidump_stackwalk
on purpose in order to avoid breaking someone that uses it.
It can be added later to the machine output if needed.
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/7754002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1406 4c0a9323-5329-0410-9bdc-e9ce6186880e
This introduces the microdump_stackwalk binary which takes advantage
of the MicrodumpProcessor to symbolize microdumps.
Its operation is identical to the one of minidump_stackwalk.
This CL, in fact, is also refactoring most of the common bits into
stackwalk_common.
BUG=chromium:410294
R=mmandlis@chromium.org
Review URL: https://breakpad.appspot.com/4704002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1405 4c0a9323-5329-0410-9bdc-e9ce6186880e
processing upcoming implementation.
dump_context.cc and dump_object.cc added in r/1370
microdump_processor.cc and microdump_processor_unittest.cc added in
r/1372
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1373 4c0a9323-5329-0410-9bdc-e9ce6186880e
Adds the interfaces for MicrodumpProcessor (very similar to
MinidumpProcessor) and corresponding unittest stubs.
These stubs are required for multi-side integration and to start
rolling the updated processor library into the dependent projects.
BUG=chromium:410294
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1372 4c0a9323-5329-0410-9bdc-e9ce6186880e
This GYP-ifies the src/processor and src/common directories on those platforms
as well. The Makefile build uses much more granular unittest executables, so
the new processor_unittests does not yet link because of multiple main() symbols,
but this will be fixed later.
Update issue 575
R=mark@chromium.org
Review URL: https://breakpad.appspot.com/10674002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1358 4c0a9323-5329-0410-9bdc-e9ce6186880e
- Convert time_t values to UTC correctly. It is incorrect to cast a uint32_t*
to time_t* because the two types may have different widths. This is the
case on many 64-bit systems, where time_t is a 64-bit signed integer.
Conversion is unified in a single function, and additional uses of time_t
in minidump files not previously displayed in UTC are now displayed.
- Interpret the IMAGE_DEBUG_MISC structure correctly.
- When printing MINIDUMP_SYSTEM_INFO structures, always show the "x86" side
of the union, and state whether it's expected to be valid. (Existing
Breakpad-produced non-Windows minidumps for x86_64 use the "x86" side of
union, but Windows minidumps for x86_64 use the "other" side, so I want to
print both.)
R=ivanpe@chromium.org
Review URL: https://breakpad.appspot.com/5674002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1339 4c0a9323-5329-0410-9bdc-e9ce6186880e
.raSearchStart in the cases where there are alignment operators in
the program string.
If alignment operators are found in the program string, the current
value of %ebp must be valid and it is the only reliable data point
that can be used for getting to the previous frame. Previously, the
.raSearchStart calculation was based on %esp and when %esp is aligned
in the current frame (which is a lossy operation) the resulting
.raSearchStart cannot was incorrect. There is code that is trying to
work around this problem (scanning of up to 3 words for a return
address) which is unreliable and it doesn't work in many cases (e.g.
when the alignment is on a 64-byte boundary).
This fix is already deployed in Google and it was measured to reduce
the number of wrong stack traces (for Windows crashes) by 45%. No
regressions have been found so far.
Here is an example of an issue that was fixed by this change (where
register %esp is aligned on the 64-byte boundary and the workarounds
that we already had didn't work):
https://code.google.com/p/chromium/issues/detail?id=311359
0:013> uf chrome_59630000!base::MessagePumpForIO::DoRunLoop
518 59685c39 55 push ebp
518 59685c3a 8bec mov ebp,esp
518 59685c3c 83e4c0 and esp,0FFFFFFC0h <== 64-byte boundary
518 59685c3f 83ec34 sub esp,34h
518 59685c42 53 push ebx
518 59685c43 56 push esi
Program string contains 64-byte alignment:
$T1 .raSearch = $T0 $T1 4 - 64 @ = $ebp $T1 4 - ^ = $eip $T1 ^ =
$esp $T1 4 + = $20 $T0 56 - ^ = $23 $T0 60 - ^ = $24 $T0 64 - ^ =
Review URL: https://breakpad.appspot.com/694002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1232 4c0a9323-5329-0410-9bdc-e9ce6186880e
Here is the symbol parser output:
E0906 11:27:06.051507 22535 basic_source_line_resolver.cc:76] Line 380187: ParseLine failed
E0906 11:27:06.051614 22535 basic_source_line_resolver.cc:76] Line 380188: ParseLine failed
E0906 11:27:06.051648 22535 basic_source_line_resolver.cc:76] Line 380190: ParseLine failed
E0906 11:27:06.051679 22535 basic_source_line_resolver.cc:76] Line 380191: ParseLine failed
E0906 11:27:06.200814 22535 basic_source_line_resolver.cc:76] Line 446729: ParseLine failed
Here are the contents of the Breakpad symbol file:
FUNC 440d60 49 0 __copy_helper_block_
440d60 b 0 3160 <<<----------- the third number is the line number
440d6b 3e 0 3160 <<<---------------------------- same here
FUNC 440db0 36 0 __destroy_helper_block_
440db0 a 0 3160 <<<---------------------------- same here
440dba 2c 0 3160 <<<---------------------------- same here
Review URL: https://breakpad.appspot.com/629002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1214 4c0a9323-5329-0410-9bdc-e9ce6186880e
Tested with a minidump containing a version 3 structure to validate the string conversion routines. Interestingly enough the time_zone names does not appear to be abbreviation as the documentation was suggesting but full names, e.g. Eastern Standard Time:
MDRawMiscInfo
size_of_info = 232
flags1 = 0xf7
process_id = 0x54c4
process_create_time = 0x51a9323c
process_user_time = 0x1
process_kernel_time = 0x0
processor_max_mhz = 3100
processor_current_mhz = 1891
processor_mhz_limit = 3100
processor_max_idle_state = 0x1
processor_current_idle_state = 0x1
The new fileds follow:
process_integrity_level = 0x1000
process_execute_flags = 0x4d
protected_process = 0
time_zone_id = 2
time_zone.bias = 300
time_zone.standard_name = Eastern Standard Time
time_zone.daylight_name = Eastern Daylight Time
Review URL: https://breakpad.appspot.com/617002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1204 4c0a9323-5329-0410-9bdc-e9ce6186880e
More specifically:
- Detect corrupt symbols during minidump processing and provide the list of modules with corrupt symbols in the ProcessState. This will allow listing the corrupt symbol files in the final crash report.
- Skip and recover from symbol data parse errors - don't give up until 100 parse errors are seen.
- In order to recover from '\0' (null terminator) in the middle of a symbol file, a couple of methods have to be updated to require both buffer pointer and length. Previously they required only a buffer pointer (char *) and the size of the buffer was evaluated using strlen which is not reliable when the data is corrupt. Most of the changes are due to these signature updates.
- Added and updated unittests.
Also, updated minidump_stackwalk to show a WARNING for corrupt symbols. Output looks like this:
...
Loaded modules:
0x000da000 - 0x000dafff Google Chrome Canary ??? (main)
0x000e0000 - 0x0417dfff Google Chrome Framework 0.1500.0.3 (WARNING: Corrupt symbols, Google Chrome Framework, 4682A6B4136436C4BFECEB62D498020E0)
0x044a8000 - 0x04571fff IOBluetooth 0.1.0.0
...
Review URL: https://breakpad.appspot.com/613002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1200 4c0a9323-5329-0410-9bdc-e9ce6186880e
